Glovebox Light Kit Kushaq, Taigun, Virtus — Full glovebox LED light kit with fuse tap for MQB cars — Kushaq, Taigun, Virtus & Slavia. Plug-and-play fitment. Everything needed for a clean
| 🏷️ Brand | TecUpdater |
| 📦 Product Type | Glovebox light full installation kit |
| 💡 Light Type | Halogen (T10 LED optional) |
| 🔧 Installation | Plug and play, no wire cutting |
| 🧰 Fuse Protection | Fuse tap with 7.5A fuse |
| 🚗 Vehicle Platform | MQB (India) |
| 🛡️ Warranty | 6 Months |
| 🔄 Return Policy | Exchange Only |
Many MQB platform vehicles sold in India come with the physical provision for a glovebox light and switch, including dedicated mounting slots and a lid-operated switch location. However, the light, wiring, and fuse are often omitted from the factory to reduce production costs on lower or mid variants.
This results in a glovebox that remains unlit despite being structurally ready for illumination. The TecUpdater Glovebox Light Full Kit is designed to restore this missing feature in a correct and safe manner, following OEM electrical logic rather than aftermarket shortcuts.
Where and How It Is Used
The glovebox already has:
- A dedicated slot for the glovebox light housing
- A pre-designed mounting point for the switch
- A lid contact position where the glovebox door presses the switch to turn the light OFF when closed
This kit uses these factory-provided locations. When installed, the light turns ON automatically when the glovebox is opened and turns OFF when the lid is closed, exactly as intended in OEM configurations.
Power is sourced from the vehicle’s fuse box using the supplied fuse tap, ensuring the glovebox light circuit remains electrically isolated and protected.
Electrical Safety and Fuse Logic
A key design principle of this kit is that no electrical load should be added to a vehicle without proper fuse protection. The supplied fuse tap includes a 7.5 amp fuse dedicated to the glovebox light circuit.
This ensures:
- Overcurrent protection
- No load stress on existing circuits
- Compliance with safe automotive wiring practices
The fuse tap is installed into an empty fuse slot in the fuse box, avoiding any interference with existing vehicle systems.
Harness and Connector Design
The kit includes a complete wiring harness designed specifically for MQB cars. All connections are plug-and-play, with no wire cutting, splicing, or insulation removal required.
The harness routes cleanly from the fuse box to the glovebox light location, maintaining an OEM-style installation finish.
Light Source and LED Upgrade Option
The standard glovebox light supports a halogen bulb. For users who prefer brighter and cleaner illumination, an optional T10 white LED can be installed as an upgrade.
The LED option:
- Improves visibility inside the glovebox
- Produces less heat
- Matches modern interior lighting aesthetics
Both halogen and LED options are compatible with the supplied light housing.
Installation Notes
- No wire cutting required
- No coding or scanning required
- Uses fuse tap with dedicated 7.5A fuse
- Fits directly into factory glovebox slots
- Switch operates automatically via glovebox lid
The installation can be completed using basic tools. For users who require guidance, TecUpdater provides free installation assistance over phone or WhatsApp.
Vehicle Compatibility
This kit is designed specifically for MQB platform vehicles sold in India, including:
- Skoda Slavia – please verify slots for switch and light in your car before placing order
- Skoda Kushaq
- Volkswagen Taigun
- Volkswagen Virtus
- Volkswagen Kylaq
Compatibility is based on factory glovebox design and fuse box layout used in these models.
Who Should Buy This Product
- Owners of MQB cars without factory glovebox lighting
- Users who want OEM-style functionality, not aftermarket hacks
- Installers seeking a clean, reversible solution
- Buyers who value electrical safety and fused connections
Who Should Not Buy This Product
- Vehicles outside the MQB platform
- Cars that already have factory glovebox lighting installed
- Users expecting ambient or decorative lighting effects
Summary
The TecUpdater Glovebox Light Full Kit restores a factory-provisioned feature that was omitted for cost reasons, using correct electrical practices and OEM-style mounting points. With a fused power supply, plug-and-play harness, and optional LED upgrade, it delivers a clean, safe, and functional glovebox lighting solution for MQB platform cars.
For installation guidance, users can contact TecUpdater directly at +91-96252-18968 for free assistance.
Glovebox Light Kit Kushaq, Taigun, Virtus — Overview
The glovebox light kit Kushaq, Taigun, Virtus restores the illumination that MQB platform cars are structurally ready for but often ship without on lower and mid variants. Installing this glovebox light kit Kushaq, Taigun, Virtus is plug-and-play with no wire cutting, using a 7.5A fuse tap to safely power the missing light and switch.
Looking for a PQ glovebox kit or footwell lights? Check below.
OEM Footwell Light Kit for Volkswagen & Skoda – Taigun, Virtus, Kushaq (Front / Rear Options)
Price range: ₹2,300.00 through ₹4,390.00 Select options This product has multiple variants. The options may be chosen on the product pageFootwell and Boot Light Kit for Volkswagen and Skoda Cars like Polo, Vento, Ameo, Rapid and Slavia
Price range: ₹2,150.00 through ₹4,780.00 Select options This product has multiple variants. The options may be chosen on the product page
Benefits
- Adds OEM-style glovebox lighting
- Uses factory slots and switch locations
- Fused power supply for electrical safety
- No wire cutting or permanent modification
- Optional LED upgrade for better visibility
FAQs
No, the entire kit is plug and play. No wire cutting, splicing, or insulation removal is required at any point in the installation.
Yes, the kit uses the factory-provided lid contact position, so the light turns on automatically when the glovebox is opened and turns off when the lid is closed, just like an OEM setup.
No, no coding or scanning is required. The kit simply uses the existing factory mounting slots and fuse box.
Yes, installation can be completed using basic tools. If you need guidance, TecUpdater also provides free installation assistance over phone or WhatsApp at +91-96252-18968.
Yes, this kit is designed for MQB platform vehicles sold in India, including the Skoda Slavia, Skoda Kushaq, Volkswagen Taigun, Volkswagen Virtus, and Volkswagen Kylaq.
The kit comes with a standard halogen bulb by default. An optional T10 white LED can be installed as an upgrade for brighter, cooler-running illumination.
The kit includes a dedicated wiring harness, a fuse tap with a 7.5A safety fuse, a glovebox switch, and a light assembly.
Many MQB platform cars have the physical provision for a glovebox light and switch, including the mounting slots, but the light, wiring, and fuse are often left out at the factory on lower or mid variants to reduce costs. This kit restores that missing feature using the existing provisions.
Yes, the kit includes a fuse tap with a dedicated 7.5A fuse that plugs into an empty slot in the fuse box, giving the glovebox light circuit overcurrent protection without disturbing existing vehicle circuits.
It is designed to fit the Slavia’s factory glovebox provisions, but TecUpdater recommends verifying that your specific car has the switch and light mounting slots before placing the order.
Yes, TecUpdater offers free installation assistance over phone or WhatsApp at +91-96252-18968.
This glovebox light kit comes with a 6 month warranty.
Reviews
There are no reviews yet.