Footwell Light Kit for Taigun Virtus, Kushaq — OEM-style footwell light kit for VW Taigun, Virtus & Skoda Kushaq, front and rear options available. Everything needed for a clean, factory-look install.
| 💡 Product Type | OEM Footwell Lighting Kit |
| 🚗 Compatible Cars | VW Taigun, VW Virtus, Skoda Kushaq |
| 🧩 Platform | MQB-A0 |
| 🔧 Available Options | Front Only / Rear Only / Front + Rear |
| 🪛 Rear Installation | Under-seat mounting with OEM brackets |
| ⚡ Connection Type | Plug-and-play (rear) / Fuse box or BCM (Fuse tap not needed) (front) |
| 🧠 BCM Coding | Optional for OEM style upgrade. Reach us for coding. |
| 💡 LED Type | OEM Volkswagen/Skoda LED Modules |
| 📝 Warranty | 6 Months |
| ♻️ Return Policy | Exchange Only |
Footwell lighting is one of those subtle interior upgrades that completely changes the cabin experience at night. This TecUpdater OEM Footwell Light Kit is designed specifically for MQB-A0 platform Volkswagen and Skoda cars, ensuring a clean factory look, perfect brightness and long-term reliability.
The kit uses 100% OEM LED footwell lamps, not aftermarket strips, and follows Volkswagen-Skoda’s original installation logic. Rear footwell lights are mounted under the front seats using dedicated OEM-style brackets, exactly how the factory installs them.
Footwell Light Kit Taigun, Virtus, Kushaq — Overview
This Footwell Light Kit Taigun, Virtus, Kushaq uses 100% OEM Volkswagen and Skoda LED modules, not aftermarket strips, for a genuine factory-look glow at night. Offered in front-only, rear-only, or front-plus-rear configurations, the Footwell Light Kit Taigun, Virtus, Kushaq mounts its rear lamps under the seat using OEM brackets for a clean MQB-A0 install.
Looking for a glovebox light or PQ footwell kit? Check below.
OEM Glovebox Light Kit for Skoda Kushaq, Slavia & VW Taigun, Virtus – MQB Cars, Fuse Tap Included
Original price was: ₹3,300.00.₹2,300.00Current price is: ₹2,300.00. Add to cart Buy It Now!Footwell and Boot Light Kit for VW Polo, Vento, Ameo & Skoda Rapid, Slavia – Harness and Fuse Tap Included
Price range: ₹2,150.00 through ₹4,780.00 Select options This product has multiple variants. The options may be chosen on the product page
Available Configurations
Choose the setup that matches your car and requirement:
1. Front Footwell Lights – Only
- For cars without factory front footwell lights
- Requires power connection via BCM or fuse box
- If BCM based connection is done, coding will be required, provided as a separate service.
- Provides factory-style front cabin footwell illumination
BCM option is available but intentionally kept minimal for users who prefer fuse-box based installation.
2. Rear Footwell Lights – Only
- For cars that already have factory front footwell lights
- Rear lights connect directly from front footwell lamps
- 100% plug-and-play, no coding
- No wire cutting or splicing
- OEM brackets included for under-seat mounting
This is the most popular option for Taigun, Virtus and Kushaq owners.
3. Front + Rear Footwell Lights (Complete Kit)
- Full cabin footwell lighting, front and rear
- OEM LEDs used throughout
- Rear lights mount under seats using brackets
- Front connection via BCM or fuse box
- Rear lights daisy-chain from front like factory setup
Vehicle Compatibility
Designed specifically for MQB-A0 platform cars, including:
Volkswagen
- Taigun
- Virtus
Skoda
- Kushaq
Compatible across variants where footwell lighting is supported by BCM architecture.
Installation Options
Cars WITHOUT factory front footwell lights
- Front lights require power feed
- Connection via:
- Fuse box (preferred for simplicity), or
- BCM (coding will be required)
- Rear lights (if chosen) connect from front lamps
Cars WITH factory front footwell lights
- Rear footwell lights connect directly from front
- No BCM access required
- No coding
- Completely plug-and-play
Key Features & Benefits
- Genuine OEM LED footwell lamps
- Factory light colour and brightness
- OEM-style brackets for rear under-seat mounting
- No aftermarket LED strips or glue mounts
- Clean wiring layout with proper connectors
- Reversible installation
- Maintains factory interior aesthetics
- Safe for long-term use
FAQs
This kit carries a 6 month warranty, with an exchange-only return policy.
No. On cars that already have factory front footwell lights, the rear lights connect directly from the front footwell lamps and are completely plug-and-play, with no coding and no wire cutting or splicing.
Only if you choose the BCM-based power connection. Coding is required in that case and is offered as a separate service. If you instead use the fuse-box connection for the front lights, no coding is needed, which is why the BCM option is kept as a secondary path for those who prefer fuse-box installation.
No. This kit uses genuine OEM Volkswagen and Skoda LED footwell modules, not aftermarket LED strips or glue-mounted lighting, so the light colour and brightness match the factory look.
Rear lights are mounted under the front seats using dedicated OEM-style brackets, following the same installation logic Volkswagen and Skoda use at the factory.
This kit is designed for MQB-A0 platform Volkswagen Taigun and Virtus, and Skoda Kushaq, across variants where footwell lighting is supported by the BCM architecture.
The Rear Footwell Lights Only option is the most popular choice, since it applies to cars that already have factory front footwell lights and installs as a fully plug-and-play add-on with no coding.
Choose either the Front Only kit or the Front and Rear complete kit. Both require a power connection for the front lights via the fuse box or BCM, and if BCM is used, coding is required as a separate service.
Yes, the installation is designed to be reversible and does not permanently alter the factory wiring, so the kit can be removed without affecting the car’s original interior lighting setup.
No modification is needed. The kit includes OEM-style brackets specifically for under-seat mounting of the rear lights, matching the factory fitment method.
Not sure which one fits your car? See the full Footwell & Glovebox Light Guide for the complete lineup by platform.
Samarth Kaushik –
The whole process was some 30 minutes. I did via fuse box. It is same as factory type if you do install the wires neatly as they come with black tape wrapping already.