Is this sold as a pair or a set?

No — each listing is Set of 1, a single pigtail connector. Order the MAF Sensor Pigtail and Injector Pigtail separately if you need both, and order multiples if you need more than one of the same type (e.g. one pigtail per injector on a multi-cylinder engine).

How long is the wire on each pigtail?

Approximately 5 inches (about 13cm) of wire is attached to each connector, enough to splice into your existing harness.

How many pins does the MAF sensor pigtail have?

The MAF Sensor Pigtail uses a 4-pin connector housing, though only 3 of the wires are used for the actual connection.

How many pins does the injector pigtail have?

The Injector Pigtail uses a 2-pin connector.

Will this fit my exact Hyundai or Kia model?

This is listed broadly for Hyundai and Kia vehicles from 2018 onwards, but connector shape can vary by model and engine even within that range. Please compare the connector photos against your own car's connector before ordering, or send us a photo to confirm the match.

Is this a plug-and-play part?

No. This is a repair pigtail meant to be spliced onto your existing wiring using crimp connectors or solder plus heat-shrink tubing, not a direct plug-in replacement.

MAF & Injector Pigtail Connector - Hyundai & Kia

Name: MAF & Injector Pigtail Connector - Hyundai & Kia | TecUpdater
Brand: TecUpdater
SKU: HyundaiKia-SensorPigtails
Price: 450.00 INR
Availability: InStock

Repair or Replace a Damaged MAF or Injector Connector

These are OEM-style repair pigtail connectors for Hyundai and Kia cars (2018 onwards), sold individually (Set of 1). The MAF Sensor Pigtail is a 4-pin connector housing (3 wires are used for the connection); the Injector Pigtail is a 2-pin connector. Each pigtail comes with roughly 5 inches (about 13cm) of wire attached, ready to splice into your existing harness.

Fitment varies across Hyundai and Kia models and engines, even within the same year range — please compare the connector photos closely against the connector on your own car before ordering.

₹450.00

+ Free Shipping

Connector Type

MAF Sensor Pigtail (4-Pin)
Injector Pigtail (2-Pin)

Clear

- +

Free Shipping.
Enter PIN to check delivery date.

Guaranteed Safe Checkout Via RazorPay

SKU: HyundaiKia-SensorPigtails Categories: Sensor & Injector Pigtails, Wiring Harness & Cables Tags: fuel injector, Hyundai Kia, MAF sensor, pigtail connector, wiring accessories Brand: TecUpdater

MAF Sensor & Fuel Injector Pigtail Connector for Hyundai & Kia (2018 Onwards) — OEM-style repair pigtail connectors for Hyundai and Kia cars, sold individually as a MAF Sensor Pigtail (4-Pin) or an Injector Pigtail (2-Pin), each with about 5 inches of wire attached.

🏷️ Brand	TecUpdater
🔌 MAF Sensor Pigtail	4-Pin connector housing, 3 wires used for the connection
🔌 Injector Pigtail	2-Pin connector housing
📏 Wire Length	~5 inches (approx. 13cm) per pigtail
📦 Sold As	Set of 1 (individually) — order separately for MAF and Injector
🚗 Compatibility	Hyundai & Kia vehicles, 2018 onwards — verify against your car’s actual connector before ordering
🪛 Installation	Splice into your existing harness (crimp or solder + heat-shrink recommended); not plug-and-play
♻️ Return	Exchange Only

Why These Pigtails Exist

MAF sensor and fuel injector connectors are exposed to engine heat, vibration and oil residue, and their wiring or connector housing can crack, melt, or corrode over time. When that happens, the fix is usually not a new sensor or injector — it is a new pigtail connector spliced onto the existing wiring. These pigtails replace just the damaged connector end, so you keep the rest of the factory harness intact.

Fitment — Please Verify Before Ordering

This listing is scoped broadly to Hyundai and Kia vehicles from 2018 onwards, but connector shape and pin layout can differ between models and even between engine options within the same model. Compare the connector photos carefully against the connector on your own vehicle (or the damaged one you are replacing) before ordering. If you are unsure, send us a photo of your existing connector and we can help confirm the match.

Installation Notes

This is a repair pigtail, not a plug-and-play adapter — it is spliced onto your existing wiring, not swapped in directly.
Match and splice each wire by position/colour to the corresponding wire on your original connector.
Crimp or solder each joint, then seal with heat-shrink tubing for a weatherproof connection.
Double-check the connection with a multimeter for continuity before reassembling.

What You Get

One pigtail connector per order (Set of 1), matching the variant you select — MAF Sensor Pigtail (4-Pin) or Injector Pigtail (2-Pin). Order both separately if you need one of each.