Hyundai Kia INFAC Horn Pigtail Adapter Pair – INFAC Connector to Generic Spade Terminals

,

Run Generic Spade-Terminal Horns on a Factory INFAC Plug

This converts factory 2-pin INFAC horn connectors to standard spade-terminal horns without cutting the original wiring. It suits installing aftermarket or generic dual-tone horns while preserving the OEM harness.

945.00

+ Free Shipping
- +
Free Shipping.
Enter PIN to check delivery date.
Guaranteed Safe Checkout Via RazorPay

Hyundai Kia INFAC Horn Pigtail Adapter Pair – OEM INFAC Connector to Generic Horn Terminals

This Hyundai Kia INFAC horn pigtail adapter pair plugs straight into the factory INFAC connector and outputs standard spade terminals for generic horns, with no wiring changes needed. Built with automotive-grade wire and braided sleeving, the Hyundai Kia INFAC horn pigtail adapter pair also lets spade-terminal cars upgrade to OEM-style INFAC horns.

Upgrade your Hyundai or Kia equipped with factory INFAC horn connectors to standard aftermarket horns without modifying the vehicle wiring. This pair of premium pigtail adapters plugs directly into the original INFAC horn connector and provides insulated male/female spade terminals that fit most generic thimble-style horn connections. The harness uses automotive-grade wires, OEM-style sealed connectors and protective braided sleeving for long-term reliability.

🏷️ BrandTecUpdater
🚗 CompatibilityHyundai & Kia vehicles with OEM INFAC horn connector
🔌 OutputStandard spade terminals for generic horns
✂️ Wire CuttingNo
⚡ Plug & PlayYes
📦 Box Contents2 x INFAC horn pigtail adapters
♻️ ReturnExchange Only
🔢 HSN8544

Vehicle Compatibility

Designed for vehicles equipped with standard 6.3 mm spade (thimble/blade) horn terminals that are being upgraded to OEM Hyundai/Kia INFAC horns.

Commonly suitable for many variants of:

Maruti Suzuki

  • Alto
  • Alto K10
  • S-Presso
  • WagonR
  • Celerio
  • Swift
  • Dzire
  • Baleno
  • Ignis
  • Fronx
  • Brezza
  • Ertiga
  • XL6
  • Ciaz
  • Eeco
  • Jimny
  • Grand Vitara

Tata

  • Tiago
  • Tigor
  • Punch
  • Altroz
  • Nexon
  • Harrier
  • Safari

Mahindra

  • Bolero
  • Bolero Neo
  • Scorpio
  • Scorpio N
  • Thar
  • XUV300
  • XUV 3XO
  • XUV700

Toyota

  • Glanza
  • Urban Cruiser
  • Taisor
  • Rumion

Honda

  • Amaze
  • City
  • Jazz
  • WR-V

Renault

  • Kwid
  • Kiger
  • Triber

Nissan

  • Magnite

MG

  • Astor
  • Hector

Volkswagen

  • Polo
  • Vento
  • Ameo

Skoda

  • Rapid

Important: Compatibility depends on the vehicle having factory 6.3 mm spade/blade horn terminals. Please compare your existing horn connector before ordering.


Compatible Horns

Compatible with genuine Hyundai/Kia INFAC weather-sealed horns using the factory 2-pin INFAC connector, including horns commonly sourced from:

  • Hyundai Creta
  • Venue
  • Verna
  • i20
  • Grand i10 NIOS
  • Aura
  • Exter
  • Alcazar
  • Tucson
  • Kia Sonet
  • Seltos
  • Carens
  • Carnival

Why Choose This Adapter?

Many enthusiasts prefer the louder, OEM-quality Hyundai/Kia INFAC horns when upgrading their vehicles. However, these horns use a sealed INFAC connector, while most other manufacturers use conventional 6.3 mm blade (spade/thimble) terminals.

This plug-and-play adapter bridges the two systems, allowing Hyundai/Kia OEM INFAC horns to be installed on vehicles with conventional horn wiring—without cutting or modifying the factory harness. Simply connect the vehicle’s existing spade terminals to the adapter and plug the INFAC connector into the horn for a clean, reversible installation with an OEM-style finish.

Why buy this adapter from TecUpdater? Hyundai and Kia use a proprietary INFAC connector on their factory horns, which is why a generic aftermarket horn won’t plug in without an adapter like this one. Each pigtail keeps the original INFAC-side connector intact and converts the output to standard spade terminals, so the factory harness itself is never cut or altered. TecUpdater builds these with OEM-style sealed connectors and braided sleeving, backed by the standard exchange policy shown above.

Compatible search terms: This adapter is also searched for as a Hyundai horn adapter, INFAC horn connector, Hyundai/Kia horn pigtail, or Kia horn adapter — all referring to the same INFAC-to-spade conversion this pair provides.


FAQs

This adapter pair carries a 1 year warranty.

No. The adapter plugs directly into your vehicle’s existing spade terminals on one end and the horn’s INFAC connector on the other, so the factory harness is never cut or altered.

Two INFAC horn pigtail adapters, built with automotive-grade wires, OEM-style sealed connectors, and protective braided sleeving.

Genuine Hyundai and Kia INFAC weather-sealed horns that use the factory 2-pin INFAC connector, commonly sourced from models such as the Hyundai Creta, Venue, Verna, i20, Grand i10 NIOS, Aura, Exter, Alcazar, and Tucson, and the Kia Sonet, Seltos, Carens, and Carnival.

Yes, as long as your vehicle has factory 6.3mm spade or blade horn terminals, since that’s what the adapter’s output side is designed to connect to. Compare your existing horn connector before ordering. This is commonly suitable for many variants across Maruti Suzuki, Tata, Mahindra, Toyota, Honda, Renault, Nissan, MG, Volkswagen, and Skoda models with standard spade-terminal horn wiring.

Hyundai and Kia use a proprietary sealed 2-pin INFAC connector on their factory horns, while most other manufacturers wire their horns with conventional 6.3mm spade terminals. The two connector types don’t mate directly, which is what this adapter bridges.

No. It’s plug and play — connect your vehicle’s existing spade terminals to the adapter, then plug the INFAC connector into the horn.

Yes. Because the factory harness is never cut or modified, you can disconnect the adapter and reconnect your original horn and wiring at any time.

Exchange only.

You May Also Need

Not sure which one fits your car? See the full Horn Wire Harness Guide for the complete lineup by brand.

Weight0.25 kg
Dimensions8 × 10 × 5 cm

Reviews

There are no reviews yet.

Be the first to review “Hyundai Kia INFAC Horn Pigtail Adapter Pair – INFAC Connector to Generic Spade Terminals”

Your email address will not be published. Required fields are marked *

Shopping Cart