VW & Skoda Door Logo Projector Light — Ghost Shadow Welcome Light — LED door courtesy lights that project your car’s VW or Skoda logo onto the ground the moment a door opens, adding a premium welcome-light touch after dark. Available in High Brightness or Super High Brightness, sold as a Set of 2 (front doors) or Set of 4 (all doors).
| 🏷️ Brand | TecUpdater |
| 💡 Light Type | LED door logo projector (ghost shadow / welcome light) |
| ✨ Brightness Options | High Brightness or Super High Brightness (brighter, crisper logo projection) |
| 🚗 Compatibility | VW & Skoda models — confirm your logo/door fitment before ordering |
| 📦 Sold As | Set of 2 (2 doors) or Set of 4 (all 4 doors) |
| ⚡ Power | Tap from your car’s cabin/interior courtesy light circuit (live only when a door is open) |
| 🔗 Earthing | Use a bare metal point inside the door for ground/earth |
| 🪛 Installation | Universal wired unit — splice into wiring (crimp or solder + heat-shrink recommended); not a plug-and-play OEM connector |
| ♻️ Return | Exchange Only |
Why This Upgrade
A logo projector light adds a small but noticeable premium touch to any VW or Skoda — the badge lights up and projects onto the ground as soon as the door swings open, similar to what’s offered as a factory option on higher trims. This universal kit lets you add that same welcome-light effect to models that don’t have it stock.
Choosing Brightness & Set Size
High Brightness gives a clear, well-lit logo projection in most lighting conditions. Super High Brightness steps that up further for a crisper, more visible projection even in brighter ambient light (e.g. a lit parking area). Set of 2 covers the front doors (the ones used most often); Set of 4 covers all doors for a consistent look on every entry/exit.
Installation Notes
- This is a universal wired unit — it is spliced into your existing wiring, not a direct OEM plug-in replacement.
- Tap the power (red) wire from a cabin/interior light circuit that’s only live when the relevant door is open, so the projector switches on and off with the door as expected.
- Run the earth/ground wire to a bare metal point inside the door frame.
- Crimp or solder each joint, then seal with heat-shrink tubing for a clean, weatherproof connection.
- Test each light before final reassembly of the door panel.
What You Get
Your selected Set of 2 or Set of 4 LED door logo projector lights (VW or Skoda logo, per your car), in your chosen brightness tier, along with the wiring harness shown for splicing into your car’s cabin light circuit and door earth point.
Reviews
There are no reviews yet.