VW Skoda RCD 330 RCD 360 RCD 410 RCD 440 Radio Power and Volume Knob Replacement – Single Knob

RCD 330 360 410 440 Volume Knob VW Skoda — Replacement power and volume knob for VW Skoda RCD 330, RCD 360, RCD 410, RCD 440. Single knob, OEM fit, push-fit installation. No tools needed.

RCD 330 360 410 440 Volume Knob VW Skoda — Overview

Combining power on/off and volume control in a single OEM-fit knob, this RCD 330 360 410 440 volume knob VW Skoda suits MIB-generation head units in 6mm or 8mm shaft sizes. Just pull off the old knob and push on the RCD 330 360 410 440 volume knob VW Skoda — no tools required.

Power and Volume Control Knob for VW Skoda RCD 330 RCD 360 RCD 410 RCD 440 – OEM Fit Replacement

What It Is

This is a replacement power and volume knob for VW and Skoda MIB-generation head units — specifically the RCD 330, RCD 360, RCD 360 Pro, RCD 410, and RCD 440. On these units, a single rotary knob on the left side of the faceplate handles both functions: press it to power the unit on or off, and rotate it to adjust volume. This knob is a standalone part that fits directly onto the head unit’s control shaft.

The knob is built to OEM dimensions and finish, matching the look and feel of the factory part on these MIB-generation radios. It is not compatible with older RCD 310, RNS 315, RCD 510, or RNS 510 units, which use physically different knob designs and shaft types.

What Problem It Solves

The power and volume knob on RCD 330, 360, 410, and 440 units is a high-contact part — it is used every time the radio is operated. Over time the outer shell cracks, the inner grip loosens on the shaft, or the knob simply breaks off entirely. A broken knob makes the head unit difficult or impossible to operate since power and volume both depend on it. The head unit itself is fully functional in these cases; only the knob needs replacement.

Replacing the entire head unit to fix a broken knob is unnecessary and expensive. This part addresses the failure directly — remove the broken piece, fit the replacement, and the unit is back to normal operation within a minute.

Installation Logic

If the original knob or remnants of it are still on the shaft, grip it firmly and pull straight outward to remove it. The knob is held by friction on the control shaft and requires no tools to remove or install. Align the new knob with the shaft, press it on until it seats firmly, and test rotation and press function. The entire process takes under a minute.

No wiring, no disassembly of the head unit, and no coding is required at any stage.

Behaviour Explanation

Once installed, the knob behaves identically to the factory part. Rotating clockwise increases volume, rotating counterclockwise decreases it. A short press powers the unit on or off. On some RCD variants a long press may trigger additional functions such as muting or source switching — these functions are governed by the head unit’s firmware and remain unchanged by the knob replacement.

Key Compatibility

This knob fits MIB-generation VW and Skoda head units: RCD 330, RCD 360, RCD 360 Pro, RCD 410 Pro, and RCD 440. These are also referenced by part numbers in the 19D035280 and 5GD035280 family. Vehicles fitted with these units include VW Polo, Vento, Ameo, Virtus, Taigun, Passat, Tiguan, and Skoda Rapid, Octavia, Superb, Kushaq, and Slavia, among others across the VAG India range.

This knob is not compatible with RCD 310, RNS 315, RCD 510, or RNS 510 units — those use different knob formats and shaft designs. If you are unsure which head unit is fitted in your car, check the model designation on the faceplate or in the unit’s settings menu before ordering.

Who Should Buy

Owners of VW or Skoda vehicles with a broken, cracked, or missing power and volume knob on any of the listed MIB-generation head units. This is the correct fix when the head unit itself is working normally and only the knob has failed. Anyone who has already been quoted a full head unit replacement by a dealer or workshop for what is essentially a knob issue will find this a far more practical solution.

Who Should Not Buy

If your head unit is an RCD 310, RNS 315, RCD 510, or RNS 510, this knob will not fit — the shaft and knob format are different across those generations. If the head unit itself has a fault beyond the knob — no display, no audio output, dead faceplate — replacing the knob will not restore those functions. Confirm the head unit model before ordering.

Benefits

Restores full power and volume control function to the head unit without replacing the radio. OEM shaft fit ensures the knob seats correctly and operates with the same feel as the factory part. Push-fit installation requires no tools and no technical knowledge. Solves what is often misdiagnosed as a head unit failure when the fault is simply a broken knob.

FAQs