Why This Sequential ORVM Indicator Exists

Volkswagen and Skoda PQ-platform cars come with standard blinking ORVM indicators that look dated compared to modern vehicles. Newer models such as the Superb use matrix-style sequential indicators that not only look premium but also improve turn signal visibility.

This plug-and-play ORVM indicator upgrade brings that modern sequential effect to older PQ cars without requiring mirror replacement, wiring modification, or BCM coding.

Where This Upgrade Is Used

The sequential indicator replaces the existing ORVM indicator light module inside the side mirror housing. Once installed, the indicator:

• Flows smoothly from inner to outer edge

• Activates only during turn signal operation

• Works with the factory indicator circuit

No change is made to mirror adjustment, folding, or heating functions.

Matrix-Style Sequential Lighting

The indicator uses a matrix LED layout similar to premium VW and Skoda models. Instead of a single flash, the LEDs illuminate in a smooth sweeping pattern, making lane changes and turns more noticeable to other road users.

This improves both:

• Visual appeal

• Turn signal clarity in traffic

Plug & Play Installation – 15-Minute DIY

This upgrade is designed for easy home installation with no professional tools required beyond a basic screwdriver.

Installation steps:

1. Carefully remove the ORVM mirror glass

2. Remove the upper ORVM cap

3. Use a T20 screwdriver to remove the two screws holding the indicator module

4. Disconnect the factory indicator connector

5. Plug in the new sequential ORVM indicator

6. Reinstall all parts in reverse order

No wire cutting, splicing, or coding is involved.

Installation Notes

• Fully reversible upgrade

• No effect on warranty-safe mirror components

• Ensure mirror glass is removed gently

• Test indicator before final reassembly

Who Should Buy This

This product is ideal for:

• VW Polo, Vento, Ameo owners wanting a modern ORVM look

• Skoda Rapid owners upgrading exterior aesthetics

• Users who want a DIY, no-coding upgrade

• Enthusiasts seeking Superb-style indicators on PQ cars

Who Should Not Buy This

This product is not suitable if:

• Your car is not PQ platform

• You are looking for mirror replacement, not indicator upgrade

• You want RGB or decorative lighting

Variants / Options

• Sequential ORVM Indicator – Pair (Left + Right)

Vehicle Compatibility

Volkswagen (PQ Platform)

• Polo

• Vento

• Ameo

Skoda (PQ Platform)

• Rapid

Compatibility is platform-specific and not suitable for MQB cars.

Benefits

• Modern sequential indicator effect

• Superb-style matrix lighting appearance

• Plug-and-play, no coding required

• Quick DIY installation

• Improves side-indicator visibility

FAQs

Is BCM coding required?
No. This works directly on the factory indicator circuit.

Will this affect mirror folding or adjustment?
No. Only the indicator module is replaced.

Is this suitable for MQB cars like Virtus or Slavia?
No. This listing is only for PQ-platform cars.

Can I reinstall the stock indicator later?
Yes. The upgrade is fully reversible.